Shopping Cart Items: 0   Sub-Total : $0.00

IDIDIT Steering Columns

     
  • 1

1955-57 CHEVROLET LOWER COLUMN MOUNT

$59.00
Code: 26-160
Stainless steel column mount bracket for 1955-57 Models. Comes polished or unpolished. Unpolished can be painted to match firewall color.  Column mount will dress up steering column hole in firewall. Comes complete with T-Bolt clamp for steering column. Requires slight modification for column shift cars. Available for stick shift models only at this time. 

1955-57 CHEVROLET LOWER COLUMN MOUNT

$59.00
Code: 26-160
Stainless steel column mount bracket for 1955-57 Models. Comes polished or unpolished. Unpolished can be painted to match firewall color.  Column mount will dress up steering column hole in firewall. Comes complete with T-Bolt clamp for steering column. Requires slight modification for column shift cars. Available for stick shift models only at this time. 

IDIDIT 9-BOLT SHORTY STEERING WHEEL HUB

$165.00
Code: IDT-0001
The design of these hubs move the steering wheel 2" closer to the dash than a standard hub. Must be used with a 9-bolt style steering wheel. The picture shows the relationship between a stock hub and the shorty hub.
NOTE: When using these hubs, please be aware of the clearance needed for a signal lever or shift arm.

IDIDIT 9-BOLT SHORTY STEERING WHEEL HUB

$165.00
Code: IDT-0001
The design of these hubs move the steering wheel 2" closer to the dash than a standard hub. Must be used with a 9-bolt style steering wheel. The picture shows the relationship between a stock hub and the shorty hub.
NOTE: When using these hubs, please be aware of the clearance needed for a signal lever or shift arm.

1955-68 CHEVROLET STEERING WHEEL & HORN ADAPTOR

$43.00
Code: IDT-0001B
This is a steering wheel adaptor kit to use most stock 1955-68 GM steering wheels on a Ididit column. The kit comes with horn contact plate, spring, pin, retainer and aluminum trim ring for steering wheel. The paintable trim ring fills the void created by the small diameter wheel and the larger diameter signal housing.

1955-68 CHEVROLET STEERING WHEEL & HORN ADAPTOR

$43.00
Code: IDT-0001B
This is a steering wheel adaptor kit to use most stock 1955-68 GM steering wheels on a Ididit column. The kit comes with horn contact plate, spring, pin, retainer and aluminum trim ring for steering wheel. The paintable trim ring fills the void created by the small diameter wheel and the larger diameter signal housing.

1955-57 CHEVROLET IDIDIT CLASSIC FLOOR MOUNT

$23.00
Code: IDT-001
Bracket bolts to inside of firewall to secure bottom of steering column.

1955-57 CHEVROLET IDIDIT CLASSIC FLOOR MOUNT

$23.00
Code: IDT-001
Bracket bolts to inside of firewall to secure bottom of steering column.

STEERING COLUMN COULPER

$60.00
Code: IDT-002
Coupler necessary when using a floor shift style column and a stock 1955-57 steering box. Coupler is 1"DD x 3/4" DD. Requires cutting 2 flat edges in stock steering shaft to create a 3/4"DD.

STEERING COLUMN COULPER

$60.00
Code: IDT-002
Coupler necessary when using a floor shift style column and a stock 1955-57 steering box. Coupler is 1"DD x 3/4" DD. Requires cutting 2 flat edges in stock steering shaft to create a 3/4"DD.

1955-57 CHEVROLET IDIDIT STEERING COLUMN COUPLER

$55.00
Code: IDT-004A
Coupler necessary when using a column shift style column and a stock 1955-57 steering box. Requires cutting 2 flat edges in stock steering shaft to create a 3/4"DD.

1955-57 CHEVROLET IDIDIT STEERING COLUMN COUPLER

$55.00
Code: IDT-004A
Coupler necessary when using a column shift style column and a stock 1955-57 steering box. Requires cutting 2 flat edges in stock steering shaft to create a 3/4"DD.

1955-57 CHEVROLET STEERING COLUMN RAG JOINT

$116.00
Code: IDT-004B
Coupler necessary when using an Ididit floor shift style column and a power steering box. Rag joint has a 1" DD x 3/4-30 spline.

1955-57 CHEVROLET STEERING COLUMN RAG JOINT

$116.00
Code: IDT-004B
Coupler necessary when using an Ididit floor shift style column and a power steering box. Rag joint has a 1" DD x 3/4-30 spline.

1955-57 CHEVROLET IDIDIT STEERING COLUMN RAG JOINT

$116.00
Code: IDT-004C
Coupler necessary when using a column shift style column and a power steering box. This rag joint also is used when mating a later model steering box to an original column and splined shaft. Rag joint has a 3/4"-36 x 3/4"-30 spline.

1955-57 CHEVROLET IDIDIT STEERING COLUMN RAG JOINT

$116.00
Code: IDT-004C
Coupler necessary when using a column shift style column and a power steering box. This rag joint also is used when mating a later model steering box to an original column and splined shaft. Rag joint has a 3/4"-36 x 3/4"-30 spline.

1955 CHEVROLET STEERING COLUMN ADAPTER HARNESS

$58.00
Code: IDT-006A
This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

1955 CHEVROLET STEERING COLUMN ADAPTER HARNESS

$58.00
Code: IDT-006A
This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

1956 CHEVROLET STEERING COLUMN ADAPTER HARNESS

$58.00
Code: IDT-006B
This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

1956 CHEVROLET STEERING COLUMN ADAPTER HARNESS

$58.00
Code: IDT-006B
This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

1957 CHEVROLET STEERING COLUMN ADAPTER HARNESS

$58.00
Code: IDT-006C
This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

1957 CHEVROLET STEERING COLUMN ADAPTER HARNESS

$58.00
Code: IDT-006C
This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

GM COLUMN TURN SIGNAL CONNECTOR KIT

$17.50
Code: IDT-007
3 7/8" and 4 1/4" connector kit allows the dash harness connection to any 1969 or newer GM steering column. Comes complete with plastic plug bodies and necessary terminals.

GM COLUMN TURN SIGNAL CONNECTOR KIT

$17.50
Code: IDT-007
3 7/8" and 4 1/4" connector kit allows the dash harness connection to any 1969 or newer GM steering column. Comes complete with plastic plug bodies and necessary terminals.

IDIDIT STEERING COLUMN DRESS UP KITS

$38.50
Code: IDT-008
These dress up kits will fit 1969 or newer GM columns.Has flattened style signal lever with single screw atachment.

IDIDIT STEERING COLUMN DRESS UP KITS

$38.50
Code: IDT-008
These dress up kits will fit 1969 or newer GM columns.Has flattened style signal lever with single screw atachment.

IDIDIT COLUMN SHIFT INDICATOR

$38.50
Code: IDT-009
Plastic indicator lens with pointer to mount on column. Simple way to provide shift indicator on aftermarket automatic column. Select transmission type below.

IDIDIT COLUMN SHIFT INDICATOR

$38.50
Code: IDT-009
Plastic indicator lens with pointer to mount on column. Simple way to provide shift indicator on aftermarket automatic column. Select transmission type below.

1955-57 CHEVROLET IDIDIT AUTOMATIC TRANSMISSION TILT COLUMN

$860.00
Code: IDT-1 Auto

These are "Retrofit" tilt columns made for 1955-57 Chevrolet's. This is an 8 position tilt automatic transmission column. Columns use a 3/4" 36-spline shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. Automatic columns also have a built in neutral switch and can be used with your stock dash indicator. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel an adapter Part # IDT-0001B must be ordered. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box. Contact us for columns using rack and pinion steering. On 1957 models a tilt column will move the steering wheel 2" closer to the driver, to alleviate this issue use a straight column or a "Shorty 9 bolt" steering wheel adapter will be necessary. Please call us with technical questions or if you're not sure what to order.

NOTE: AUTOMATIC COLUMN SHIFT TRANSMISSION

MADE IN USA

Due to the size of this item shipping charges may be adjusted to some areas.

1955-57 CHEVROLET IDIDIT AUTOMATIC TRANSMISSION TILT COLUMN

$860.00
Code: IDT-1 Auto

These are "Retrofit" tilt columns made for 1955-57 Chevrolet's. This is an 8 position tilt automatic transmission column. Columns use a 3/4" 36-spline shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. Automatic columns also have a built in neutral switch and can be used with your stock dash indicator. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel an adapter Part # IDT-0001B must be ordered. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box. Contact us for columns using rack and pinion steering. On 1957 models a tilt column will move the steering wheel 2" closer to the driver, to alleviate this issue use a straight column or a "Shorty 9 bolt" steering wheel adapter will be necessary. Please call us with technical questions or if you're not sure what to order.

NOTE: AUTOMATIC COLUMN SHIFT TRANSMISSION

MADE IN USA

Due to the size of this item shipping charges may be adjusted to some areas.

1955-57 CHEVY IDIDIT FLOOR SHIFT STYLE TILT COLUMN

$500.00
Code: IDT-1 Floor Shift

These are "Retrofit" tilt columns made for 1955-57 Chevrolets. This is a floor shift style 8 position tilt column. Columns use a 1"DD shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel you must order an adapter Part # IDT-0001B. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box. Contact us for columns using rack and pinion steering. On 1957 models a tilt column will move the steering wheel 2" closer to the driver, to alleviate this issue a "Shorty 9 bolt" steering wheel adapter will be necessary. Please call us with technical questions or if you're not sure what to order.

NOTE:FLOOR SHIFT COLUMN

Due to the size of this item shipping charges may be adjusted to some areas.

MADE IN USA

1955-57 CHEVY IDIDIT FLOOR SHIFT STYLE TILT COLUMN

$500.00
Code: IDT-1 Floor Shift

These are "Retrofit" tilt columns made for 1955-57 Chevrolets. This is a floor shift style 8 position tilt column. Columns use a 1"DD shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel you must order an adapter Part # IDT-0001B. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box. Contact us for columns using rack and pinion steering. On 1957 models a tilt column will move the steering wheel 2" closer to the driver, to alleviate this issue a "Shorty 9 bolt" steering wheel adapter will be necessary. Please call us with technical questions or if you're not sure what to order.

NOTE:FLOOR SHIFT COLUMN

Due to the size of this item shipping charges may be adjusted to some areas.

MADE IN USA

1955-57 IDIDIT STRAIGHT COLUMN SHIFT STEERING COLUMN

$850.00
Code: IDT-1 Straight Auto

These are "Retrofit" steering columns for 1955-57 Chevrolets. These are column shift non-tilt columns. These are perfect if you just want to upgrade your old original column. Columns use a 3/4" 36-spline shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel an adapter Part # IDT-0001B must be ordered. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box.

MADE IN USA

Due to the size of this item shipping charges may be adjusted to some areas.

1955-57 IDIDIT STRAIGHT COLUMN SHIFT STEERING COLUMN

$850.00
Code: IDT-1 Straight Auto

These are "Retrofit" steering columns for 1955-57 Chevrolets. These are column shift non-tilt columns. These are perfect if you just want to upgrade your old original column. Columns use a 3/4" 36-spline shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel an adapter Part # IDT-0001B must be ordered. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box.

MADE IN USA

Due to the size of this item shipping charges may be adjusted to some areas.

1967-68 Ididit Signal Adapter Harness

$27.00
Code: IDT-36882
Harness necessary to adapt an Ididit or later model steering column in a 1967-68 Chevelle. This harness adapts the steering column signal harness to the original dash harness.

1967-68 Ididit Signal Adapter Harness

$27.00
Code: IDT-36882
Harness necessary to adapt an Ididit or later model steering column in a 1967-68 Chevelle. This harness adapts the steering column signal harness to the original dash harness.

1964-66 Ididit Signal Adapter Harness

$58.00
Code: IDT-37542
Harness necessary to adapt an Ididit or later model steering column in a 1964-66 Chevelle. This harness adapts the steering column signal harness to the original dash harness. 

1964-66 Ididit Signal Adapter Harness

$58.00
Code: IDT-37542
Harness necessary to adapt an Ididit or later model steering column in a 1964-66 Chevelle. This harness adapts the steering column signal harness to the original dash harness. 

1964-65 CHEVELLE FLOOR SHIFT TILT COLUMN

Code: IDT-CH6465
Retrofit floor shift steering columns for a 1964-65 Chevelle or El Camino. These do not require modifications to your original car to install. Uses your original dash and floor mount. Column comes standard with 8-position tilt, self-canceling turn signals, 4-way flashers, knobs & levers, 3 7/8" wiring plug, and a 3/4" 36 lower shaft. A steering shaft installation kit will be required. These are listed as separate items in this section. These columns use a 1969 and later signal housing, aftermarket wheels will fit. To use your original steering wheel and adapter can be purchased. Columns are available in paintable steel, chrome, black power coated, brushed or polished aluminum. Column styles and pricing listed below.

NOTE: Listed below are optional part numbers necessary to complete some installations

Part # IDT-0001B Steering wheel adapter
Part # IDT-CH656KIT
 


1964-65 CHEVELLE FLOOR SHIFT TILT COLUMN

Code: IDT-CH6465
Retrofit floor shift steering columns for a 1964-65 Chevelle or El Camino. These do not require modifications to your original car to install. Uses your original dash and floor mount. Column comes standard with 8-position tilt, self-canceling turn signals, 4-way flashers, knobs & levers, 3 7/8" wiring plug, and a 3/4" 36 lower shaft. A steering shaft installation kit will be required. These are listed as separate items in this section. These columns use a 1969 and later signal housing, aftermarket wheels will fit. To use your original steering wheel and adapter can be purchased. Columns are available in paintable steel, chrome, black power coated, brushed or polished aluminum. Column styles and pricing listed below.

NOTE: Listed below are optional part numbers necessary to complete some installations

Part # IDT-0001B Steering wheel adapter
Part # IDT-CH656KIT
 


1964-66 CHEVELLE STEERING COLUMN INSTALLATION KIT

Code: IDT-CH646KIT
Kit to install your Ididit steering column into a 1964-66 Chevelle. This kit fits all 1964-65 Chevelle's and a 1966 with a column shift. Kit includes a new coupler, steering shaft and rag joint. In models using an original dash harness you'll get a 4-way flasher harness. Models using an aftermarket wiring harness don't need that. To get the correct installation kit you'll need to know the steering shaft diameter and spline count. Kit prices and options are listed below. 

1964-66 CHEVELLE STEERING COLUMN INSTALLATION KIT

Code: IDT-CH646KIT
Kit to install your Ididit steering column into a 1964-66 Chevelle. This kit fits all 1964-65 Chevelle's and a 1966 with a column shift. Kit includes a new coupler, steering shaft and rag joint. In models using an original dash harness you'll get a 4-way flasher harness. Models using an aftermarket wiring harness don't need that. To get the correct installation kit you'll need to know the steering shaft diameter and spline count. Kit prices and options are listed below. 
     
  • 1

Categories

Secure Shopping

Merchant Services

Credit Cards We Accept

Worldwide Shipping

Social Links

Lindenhurst Chamber of Commerce

Mini Cart

Your Cart Is Empty

Our eBay Rating

Featured Products

News Highlights

Blog Highlights

0 Item(s)
$0.00