1955-57 CHEVY ORIGINAL POWER STEERING KIT

1955-57 CHEVY ORIGINAL POWER STEERING KIT
A complete original style power steering kit for a 1955-57 Chevy. This kit contains all new parts including an upgraded 1963-82 GM control valve. This can be added to any car using the stock original manual steering box. Kit includes: Center link, pitman arm, idler arm, idler bushings, tie rod and sleeve, control valve with 2 cylinder hoses, p/s cylinder, cylinder to frame bracket, cylinder bolts and grommets. Kit does not include power steering pump and hoses. Can be used with original style pump or with later 1970-82 style power steering pump. 

CURRENTLY UNAVAILABLE
Code27-049H
Weight 25
Save wishlist

Please review these other products:

 
1955-57 CHEVROLET POWER STEERING PRESSURE HOSE
Reproduction power steering pressure hose from pump to control valve.




Our Price: $49.95

click to see more

 
Reproduction power steering pressure hose from pump to control valve.




Our Price: $49.95

click to see more

 
1955-57 CHEVROLET POWER STEERING RETURN HOSE
Reproduction power steering return hose from pump to control valve.

This Item being discontinued as a single item- 1-Left
 Our Price: $36.00

click to see more

 
Reproduction power steering return hose from pump to control valve.

This Item being discontinued as a single item- 1-Left
Our Price: $36.00

click to see more

 
SMALL BLOCK POWER STEERING BRACKETS
This bracket is designed for a Chevrolet Saginaw non-metric power steering pump with an attached reservoir.This style pump was used in most Chevrolet models into the early 1980'sThis style bracket will clear the alternator belt no matter where the alternator is mounted .Short water pump applications are normally driven off a add on third crankshaft pulley.
SMALL BLOCK
SHORT WATER PUMP 		Our Price: $95.00

click to see more

 
This bracket is designed for a Chevrolet Saginaw non-metric power steering pump with an attached reservoir.This style pump was used in most Chevrolet models into the early 1980'sThis style bracket will clear the alternator belt no matter where the alternator is mounted .Short water pump applications are normally driven off a add on third crankshaft pulley.
SMALL BLOCK
SHORT WATER PUMP
Our Price: $95.00

click to see more

 
SMALL BLOCK POWER STEERING BRACKETS
This bracket bolts to the front of the engine block and the water pump boss.This style bracket will mount the pump in approximately the same location as factory without using the head or exhaust bolts.This bracket will require the use of a power steering pump with two mounting locations on the canister.
SMALL BLOCK
LONG WATER PUMP 		Our Price: $95.00

click to see more

 
This bracket bolts to the front of the engine block and the water pump boss.This style bracket will mount the pump in approximately the same location as factory without using the head or exhaust bolts.This bracket will require the use of a power steering pump with two mounting locations on the canister.
SMALL BLOCK
LONG WATER PUMP
Our Price: $95.00

click to see more

 
BIG BLOCK POWER STEERING BRACKETS
This bracket is designed for a Chevrolet Saginaw non-metric power steering pump with an attached reservoir.This style pump was used in most Chevrolet models into the early 1980'sThis style bracket will clear the alternator belt no matter where the alternator is mounted .Short water pump applications are normally driven off a add on third crankshaft pulley.
BIG BLOCK
SHORT WATER PUMP 		Our Price: $95.00

click to see more

 
This bracket is designed for a Chevrolet Saginaw non-metric power steering pump with an attached reservoir.This style pump was used in most Chevrolet models into the early 1980'sThis style bracket will clear the alternator belt no matter where the alternator is mounted .Short water pump applications are normally driven off a add on third crankshaft pulley.
BIG BLOCK
SHORT WATER PUMP
Our Price: $95.00

click to see more

 
1955-57 CHEVROLET POWER STEERING BRACKETS
This bracket is a combination front motor mount and power steering pump bracket designed specifically for 1955-57 Chevrolet cars and 1955-59 trucks.This bracket will replace the original left side engine mount and will work with up to an 8" balancer. This bracket will require the use of a 1958 or later engine block because the bracket will use bolt holes located in the side engine mount boss.(also see note below)This bracket is designed to be used with a Chevrolet Saginaw non-metric power steering pump with attached reservoir.THIS BRACKET IS FOR FRONT STYLE MOUNTS ONLY,NOT FOR SIDE ENGINE MOUNT CONVERSIONS.
SMALL BLOCK
SHORT WATER PUMP
NOTE: This bracket can be used with a stock 55-57 block with the use of part # AG-404L-1. 		Our Price: $129.00

click to see more

 
This bracket is a combination front motor mount and power steering pump bracket designed specifically for 1955-57 Chevrolet cars and 1955-59 trucks.This bracket will replace the original left side engine mount and will work with up to an 8" balancer. This bracket will require the use of a 1958 or later engine block because the bracket will use bolt holes located in the side engine mount boss.(also see note below)This bracket is designed to be used with a Chevrolet Saginaw non-metric power steering pump with attached reservoir.THIS BRACKET IS FOR FRONT STYLE MOUNTS ONLY,NOT FOR SIDE ENGINE MOUNT CONVERSIONS.
SMALL BLOCK
SHORT WATER PUMP
NOTE: This bracket can be used with a stock 55-57 block with the use of part # AG-404L-1.
Our Price: $129.00

click to see more

 
BIG BLOCK POWER STEERING BRACKETS
This style bracket bolt to the front of the engine block and to the water pump boss.Positions the pump in approximately the same location as factory.
BIG BLOCK
LONG WATER PUMP 		Our Price: $95.00

click to see more

 
This style bracket bolt to the front of the engine block and to the water pump boss.Positions the pump in approximately the same location as factory.
BIG BLOCK
LONG WATER PUMP
Our Price: $95.00

click to see more

No recommended products at the moment.