Shopping Cart Items: 0   Sub-Total : $0.00

Heidt's Hot Rod Products

     
  • 1

1964-72 CHEVELLE DROP SPINDLES

$355.00
Code: HDT-001

High performance steel 2" dropped spindle manufactured by Heidts Hot Rod Shop for a 1964-72 Chevelle. This spindle has been designed to raise the upper ball joint location 1 1/2". This determines the arc the upper control arm swings.The purpose is to give a better camber change throughout the suspension travel. This cannot be achieved with control arms. This is a bolt-in replacement. These spindles will accept any aftermarket disc brakes made for a stock spindle, if using stock disc brakes the caliper bracket needs a very minor trimming to fit. Comes with complete installation instructions. Sold as a pair.

 RECOMMEND USING WITH HEIDT'S CONTROL ARMS 

NOTE: These cannot be used with drum brakes

1964-72 CHEVELLE DROP SPINDLES

$355.00
Code: HDT-001

High performance steel 2" dropped spindle manufactured by Heidts Hot Rod Shop for a 1964-72 Chevelle. This spindle has been designed to raise the upper ball joint location 1 1/2". This determines the arc the upper control arm swings.The purpose is to give a better camber change throughout the suspension travel. This cannot be achieved with control arms. This is a bolt-in replacement. These spindles will accept any aftermarket disc brakes made for a stock spindle, if using stock disc brakes the caliper bracket needs a very minor trimming to fit. Comes with complete installation instructions. Sold as a pair.

 RECOMMEND USING WITH HEIDT'S CONTROL ARMS 

NOTE: These cannot be used with drum brakes

1964-72 CHEVELLE TUBULAR UPPER CONTROL ARMS

$485.00
Code: HDT-002
Performance tubular upper control arms manufactured by Heidts Hot Rod Shop for a 1964-72 Chevelle. These state of the art designed control arms come already powdercoated with 1 1/4" diameter tubes,urethane bushings and ball joints installed. Upper cross shafts are offset to allow better caster adjustments to improve straight line tracking and cornering. Sold as a pair.
NOTE: These will fit all 1964-72 GM A-body cars.

1964-72 CHEVELLE TUBULAR UPPER CONTROL ARMS

$485.00
Code: HDT-002
Performance tubular upper control arms manufactured by Heidts Hot Rod Shop for a 1964-72 Chevelle. These state of the art designed control arms come already powdercoated with 1 1/4" diameter tubes,urethane bushings and ball joints installed. Upper cross shafts are offset to allow better caster adjustments to improve straight line tracking and cornering. Sold as a pair.
NOTE: These will fit all 1964-72 GM A-body cars.

1964-72 CHEVELLE TUBULAR LOWER CONTROL ARMS

$735.00
Code: HDT-003-4
Performance lower control arms manufactured by Heidts Hot Rod Shop for a 1964-72 Chevelle. Control arms come already powdercoated with urethane bushings and ball joints already installed. These are built from a full 1 1/2" diameter tube and are available for either standard coil springs or coil over shocks. Sold as a pair..
NOTE: These will fit all 1964-72 GM A-body cars.

1964-72 CHEVELLE TUBULAR LOWER CONTROL ARMS

$735.00
Code: HDT-003-4
Performance lower control arms manufactured by Heidts Hot Rod Shop for a 1964-72 Chevelle. Control arms come already powdercoated with urethane bushings and ball joints already installed. These are built from a full 1 1/2" diameter tube and are available for either standard coil springs or coil over shocks. Sold as a pair..
NOTE: These will fit all 1964-72 GM A-body cars.

1967-72 CHEVELLE REAR CONTROL ARM LINK KIT

$899.00
Code: HDT-010
Performance rear control arm links manufactured by Heidts Hot Rod Shop for a 1967-72 Chevelle. Upper links are fully adjustable built from 1 1/4" diameter tube and lowers a full 1 1/2" square tube. Kit comes already powdercoated with greaseable swivel and fixed bushings installed. Urethane bushings tighten up the suspension and the swivel ends allow roll deflection under cornering loads to give solid,positive handling. Sold as a complete set.
NOTE: These will fit all 1967-72 GM A-body cars.

1967-72 CHEVELLE REAR CONTROL ARM LINK KIT

$899.00
Code: HDT-010
Performance rear control arm links manufactured by Heidts Hot Rod Shop for a 1967-72 Chevelle. Upper links are fully adjustable built from 1 1/4" diameter tube and lowers a full 1 1/2" square tube. Kit comes already powdercoated with greaseable swivel and fixed bushings installed. Urethane bushings tighten up the suspension and the swivel ends allow roll deflection under cornering loads to give solid,positive handling. Sold as a complete set.
NOTE: These will fit all 1967-72 GM A-body cars.

1967-72 CHEVELLE REAR CHASSIS BRACE LINKS

$165.00
Code: HDT-011
These performance links attach to the upper bolt of the rear link and to the rear chassis crossmember of a 1967-72 Chevelle. These are designed to take the added stress of the rear suspension links. Sold as a pair.

1967-72 CHEVELLE REAR CHASSIS BRACE LINKS

$165.00
Code: HDT-011
These performance links attach to the upper bolt of the rear link and to the rear chassis crossmember of a 1967-72 Chevelle. These are designed to take the added stress of the rear suspension links. Sold as a pair.
     
  • 1

Categories

Secure Shopping

Merchant Services

Credit Cards We Accept

Worldwide Shipping

Social Links

Mini Cart

Your Cart Is Empty

Our eBay Rating

Featured Products

0 Item(s)
$0.00