Shopping Cart Items: 0   Sub-Total : $0.00

Products

BUMPER BOLTS

$2.95
Code: 11-320
Correct stainless cap bumper bolts. Fits all models. Comes with lock washer and nut. Bolts sold single.

BUMPER BOLTS

$2.95
Code: 11-320
Correct stainless cap bumper bolts. Fits all models. Comes with lock washer and nut. Bolts sold single.

BRAKE LIGHT SWITCH CLIP

$1.00
Code: 15-015A
Metal retaining clip to hold and adjust brake light switch. Fits all year Chevelle's and many other Chevrolet or GM models.

BRAKE LIGHT SWITCH CLIP

$1.00
Code: 15-015A
Metal retaining clip to hold and adjust brake light switch. Fits all year Chevelle's and many other Chevrolet or GM models.

BACK-UP LIGHT SWITCH WITH HURST SHIFTER

$60.00
Code: 15-059M
Back-up light switch and bracket for any model equipped with a Hurst 4-speed shifter. Comes with installation instructions.

BACK-UP LIGHT SWITCH WITH HURST SHIFTER

$60.00
Code: 15-059M
Back-up light switch and bracket for any model equipped with a Hurst 4-speed shifter. Comes with installation instructions.

BRAKE PEDAL PUSH ROD CLEVIS PIN CLIP

$4.99
Code: 16-006C
Clip for master cylinder push rod clevis pin. Fits original clevis pins with groove.

CURRENTLY NOT AVAILABLE

BRAKE PEDAL PUSH ROD CLEVIS PIN CLIP

$4.99
Code: 16-006C
Clip for master cylinder push rod clevis pin. Fits original clevis pins with groove.

CURRENTLY NOT AVAILABLE

BRAKE OR CLUTCH PEDAL PIVOT SHAFT CLIP

$1.50
Code: 16-019C
Retaining clip locks in the groove on the end of the clutch pedal pivot shaft. Also fits the pivot pin on an automatic brake pedal.

BRAKE OR CLUTCH PEDAL PIVOT SHAFT CLIP

$1.50
Code: 16-019C
Retaining clip locks in the groove on the end of the clutch pedal pivot shaft. Also fits the pivot pin on an automatic brake pedal.

BRAKE CABLE GUIDE

$9.00
Code: 16-109B
Emergency brake cable guide.  Hooks into floor support and brake cable is routed through the guide to rear wheels.
Sold as a pair.

BRAKE CABLE GUIDE

$9.00
Code: 16-109B
Emergency brake cable guide.  Hooks into floor support and brake cable is routed through the guide to rear wheels.
Sold as a pair.

BARE STEEL PAINT

$13.95
Code: 18-081
Spray paint made to duplicate the look of bare metal. 

Ground Shipments Only.

BARE STEEL PAINT

$13.95
Code: 18-081
Spray paint made to duplicate the look of bare metal. 

Ground Shipments Only.

BIG BLOCK CHEVY ENGINE STARTER BRACE

$21.50
Code: 18-117
Brace between engine block and starter housing.

BIG BLOCK CHEVY ENGINE STARTER BRACE

$21.50
Code: 18-117
Brace between engine block and starter housing.

BIG BLOCK DEEP 2 GROOVE CRANKSHAFT PULLEY

$89.95
Code: 18-146A
Reproduction deep 2 groove crankshaft pulley for a big block Chevrolet engine. This part is numbered correctly for a 1969-70 396 375 hp engine, but will fit any long water pump big block engine. Stamped GM Part #3955291AB.

BIG BLOCK DEEP 2 GROOVE CRANKSHAFT PULLEY

$89.95
Code: 18-146A
Reproduction deep 2 groove crankshaft pulley for a big block Chevrolet engine. This part is numbered correctly for a 1969-70 396 375 hp engine, but will fit any long water pump big block engine. Stamped GM Part #3955291AB.

BRAKE BOOSTER EXTENSION ROD

$8.00
Code: 27-001D3
Booster extension rod measure approximately 4 3/4" long. Threads onto the booster rod and clevis will thread to other side. Male & female ends have 3/8"-24 thread.

BRAKE BOOSTER EXTENSION ROD

$8.00
Code: 27-001D3
Booster extension rod measure approximately 4 3/4" long. Threads onto the booster rod and clevis will thread to other side. Male & female ends have 3/8"-24 thread.

BRAKE BOOSTER ROD CLEVIS

$6.00
Code: 27-001D4
Clevis threads to booster extension rod to attach rod to brake pedal. Clevis has a 3/8"-24 thread.

BRAKE BOOSTER ROD CLEVIS

$6.00
Code: 27-001D4
Clevis threads to booster extension rod to attach rod to brake pedal. Clevis has a 3/8"-24 thread.

BRAKE BOOSTER PIN

$5.00
Code: 27-001D5
This pin is necessary when using our dual master cylinder conversion, Part # 27-031A with our dual 8" power brake booster, Part # 27-001D. 

BRAKE BOOSTER PIN

$5.00
Code: 27-001D5
This pin is necessary when using our dual master cylinder conversion, Part # 27-031A with our dual 8" power brake booster, Part # 27-001D. 

BIG BLOCK FRONT MOTOR MOUNT KIT

$299.00
Code: 27-003C
Front motor mount kit includes all brackets, cushions and hardware. Uses stock engine mount holes in chassis. Locates engine in stock location and allows transmission rear frame horn mounts to be used. 
 
NOTE: Requires some modification to firewall on passenger side for cylinder head clearance. Kit does not move engine forward. 

USA MADE

BIG BLOCK FRONT MOTOR MOUNT KIT

$299.00
Code: 27-003C
Front motor mount kit includes all brackets, cushions and hardware. Uses stock engine mount holes in chassis. Locates engine in stock location and allows transmission rear frame horn mounts to be used. 
 
NOTE: Requires some modification to firewall on passenger side for cylinder head clearance. Kit does not move engine forward. 

USA MADE

BRAIDED FRONT DISC BRAKE HOSE

$42.00
Code: 27-033B
Braided front brake hose for 1955-57 Chevrolet's with front disc conversion. Sold single. 

BRAIDED FRONT DISC BRAKE HOSE

$42.00
Code: 27-033B
Braided front brake hose for 1955-57 Chevrolet's with front disc conversion. Sold single. 

BRAKE HOSE RETAINER CLIP

$0.85
Code: 27-034B
U-shape clip to hold brake hose to bracket. Fits front or rear brake hose.

BRAKE HOSE RETAINER CLIP

$0.85
Code: 27-034B
U-shape clip to hold brake hose to bracket. Fits front or rear brake hose.

Battery Retainer Bolt

$0.75
Code: 60-FF01067C
Correct style bolt to hold battery retainer to tray.

Battery Retainer Bolt

$0.75
Code: 60-FF01067C
Correct style bolt to hold battery retainer to tray.

Brake or Clutch Pedal Retainer Clip

$1.50
Code: 60-SL10070A
Retaining clip locks in the groove on the end of the clutch pedal pivot shaft. Also fits the pivot pin on an automatic brake pedal.

Brake or Clutch Pedal Retainer Clip

$1.50
Code: 60-SL10070A
Retaining clip locks in the groove on the end of the clutch pedal pivot shaft. Also fits the pivot pin on an automatic brake pedal.

Brake or Clutch Pedal Support Bushings

$5.50
Code: 60-SL10070B
Bushing set for brake or clutch pedal where pin passes through pedal support. 4-pcs in a set.

Brake or Clutch Pedal Support Bushings

$5.50
Code: 60-SL10070B
Bushing set for brake or clutch pedal where pin passes through pedal support. 4-pcs in a set.

BIG BLOCK ALTERNATOR BRACKET

$126.00
Code: AG-218L
Alternator bracket kits are designed to be used with GM type external or internal regulated alternators. These also fit the new CS130 style alternators. This bracket set bolts to water pump and head. Low profile style, works well in cars or trucks with wide engine compartment. Use with part #AG-118R A/C compressor bracket.
BIG BLOCK
SHORT WATER PUMP
LEFT SIDE MOUNT-LOW PROFILE

BIG BLOCK ALTERNATOR BRACKET

$126.00
Code: AG-218L
Alternator bracket kits are designed to be used with GM type external or internal regulated alternators. These also fit the new CS130 style alternators. This bracket set bolts to water pump and head. Low profile style, works well in cars or trucks with wide engine compartment. Use with part #AG-118R A/C compressor bracket.
BIG BLOCK
SHORT WATER PUMP
LEFT SIDE MOUNT-LOW PROFILE

BIG BLOCK ALTERNATOR BRACKET

$126.00
Code: AG-218R
Alternator bracket kits are designed to be used with GM type external or internal regulated alternators.These also fit the new CS130 style alternators.This bracket set bolts to water pump and head.Low profile style, works well in cars or trucks with wide engine compartment.Use with part #AG-118L A/C compressor bracket.
BIG BLOCK
SHORT WATER PUMP
RIGHT SIDE MOUNT-LOW PROFILE

BIG BLOCK ALTERNATOR BRACKET

$126.00
Code: AG-218R
Alternator bracket kits are designed to be used with GM type external or internal regulated alternators.These also fit the new CS130 style alternators.This bracket set bolts to water pump and head.Low profile style, works well in cars or trucks with wide engine compartment.Use with part #AG-118L A/C compressor bracket.
BIG BLOCK
SHORT WATER PUMP
RIGHT SIDE MOUNT-LOW PROFILE

BIG BLOCK ALTERNATOR BRACKET

$126.00
Code: AG-222L
Alternator bracket kits are designed to be used with GM type external or internal regulated alternators.These also fit the new CS130 style alternators.This bracket set bolts to water pump and head.Low profile style, works well in Chevelle or Camaro bodies or cars and trucks with wide engine compartment.Use with factory alternator and power steering pump.
BIG BLOCK
LONG WATER PUMP
LEFT SIDE MOUNT

BIG BLOCK ALTERNATOR BRACKET

$126.00
Code: AG-222L
Alternator bracket kits are designed to be used with GM type external or internal regulated alternators.These also fit the new CS130 style alternators.This bracket set bolts to water pump and head.Low profile style, works well in Chevelle or Camaro bodies or cars and trucks with wide engine compartment.Use with factory alternator and power steering pump.
BIG BLOCK
LONG WATER PUMP
LEFT SIDE MOUNT

BIG BLOCK ALTERNATOR BRACKET

$71.95
Code: AG-225R

Mid mount alternator bracket for a Big Block Chevrolet with long water pump. Bolts alternator just above water pump inlet. Uses holes in head and water pump. Excellent for areas where clearance is an issue.

BIG BLOCK ALTERNATOR BRACKET

$71.95
Code: AG-225R

Mid mount alternator bracket for a Big Block Chevrolet with long water pump. Bolts alternator just above water pump inlet. Uses holes in head and water pump. Excellent for areas where clearance is an issue.

BIG BLOCK POWER STEERING BRACKETS

$99.95
Code: AG-403L
This bracket is designed for a Chevrolet Saginaw non-metric power steering pump with an attached reservoir.This style pump was used in most Chevrolet models into the early 1980'sThis style bracket will clear the alternator belt no matter where the alternator is mounted .Short water pump applications are normally driven off a add on third crankshaft pulley.
BIG BLOCK
SHORT WATER PUMP

BIG BLOCK POWER STEERING BRACKETS

$99.95
Code: AG-403L
This bracket is designed for a Chevrolet Saginaw non-metric power steering pump with an attached reservoir.This style pump was used in most Chevrolet models into the early 1980'sThis style bracket will clear the alternator belt no matter where the alternator is mounted .Short water pump applications are normally driven off a add on third crankshaft pulley.
BIG BLOCK
SHORT WATER PUMP

BIG BLOCK POWER STEERING BRACKETS

$99.95
Code: AG-407L
This style bracket bolt to the front of the engine block and to the water pump boss.Positions the pump in approximately the same location as factory.
BIG BLOCK
LONG WATER PUMP

BIG BLOCK POWER STEERING BRACKETS

$99.95
Code: AG-407L
This style bracket bolt to the front of the engine block and to the water pump boss.Positions the pump in approximately the same location as factory.
BIG BLOCK
LONG WATER PUMP

Categories

Secure Shopping

Merchant Services

Credit Cards We Accept

Worldwide Shipping

Social Links

Lindenhurst Chamber of Commerce

Mini Cart

Your Cart Is Empty

Our eBay Rating

Featured Products

News Highlights

Blog Highlights

0 Item(s)
$0.00